There are still some issues.
Dude, I'm really confused. You said the payload was completely fixed, was it? This is the latest version of BravoAirspace 787-9 with the GE and RR configurations. The loading data still has issues, so the fix you promised didn't already happen, did it?
Meanwhile, the startup timing of the RR configuration of ATidle is incorrect. This needs to be fixed (according to the FCOM, the startup timing of ATidle should occur when the radio altitude is 30 feet).
- KIn reply toKUNKUN⬆:KUN你太美 @KUNKUN
Here I would like to clarify:
1,It has nothing to do with any livery. The ATidle start timing error occurred on the 787-9RR configuration.
2,I didn't find any information about the complete fix of the payload in the change log. I suspect that this issue might not have been resolved until the Update 4.9 or 5 have been released, at least not in the update of 4.8.9.If it is fixed in the next two versions, please forgive my excitement. Thank you.:)
Reply
@HoLeeKaoSorry to ask you but how did you set your chair height to have the HUD so perfect ? Mine is way off in the standard seat position
- KKUN你太美 @KUNKUN
set the custom view by yourself just need ctrl+alt+number
- In reply toHoLeeKao⬆:
Francis @LeadDeveloper2026-03-13 16:20:14.947ZYou can easily view the hud
try to see in your controls settings what gives you HUD.
On the xbox controller is DPAD UP
- @HoLeeKao
I will check this also when I’m online again. I’m not sure I understand good but I will try.
About the TOGA , I just saw a movie from that A330 driver with a flight in the 787 and he confirms in that video if you don’t turn off the arm switches for AT , the plane can activate TOGA even after landing. So I’ll make sure to manually land or turn them off as soon as I touch down 👍🏻👍🏻👍🏻
- Francis @LeadDeveloper2026-03-13 19:14:41.902Z
I recently did some test landing with the 787 on Xbox X and it idle at 10 feet.
I had autothrottle On.
In reply toKUNKUN⬆:@HoLeeKaoI am not sure if I’m talking about the same but today I also tried to land with AT on ( turned off auto pilot around 300ft ) and my plane didn’t to to idle also , it kept the set approach speed untill landed but then something strange happen.
I set reverse thrusters , slow down and turn to the taxi. As soon as my engines came back to idle from reverse thrust , the thrust started to spool up to full power and I couldn’t stop it. But the AT light was off ( arm switches were still in arm ) so how can it first not go to idle when land and after that go to full power AT with the AT light off?
It looked like TOGA was activated but that’s not possible because I have only one button set to that and I 1000% didn’t push it.
Also my flaps didn’t go to 30. No matter what I tried, they didn’t move lower then 25I have a YouTube stream video about it. You can find it around 3:40:00
HoLeeKao is my channel.- Francis @LeadDeveloper2026-03-13 15:36:05.461Z
This has been happening with me as well.
I don't think (AT THE MOMENT) is a BA issue.
What I'm doing since last night is flying the 787-10 default and seeing how it behaves compared to the BA handling.
Just to confirm if whether there has been some changes with the internal WT codes or FS itself.- @HoLeeKao
I’ll try the old way when I have time again. Turn off the AT switches at final and manually dose throttle and see if it occurs.
But one small thing , can you tell me exactly what changed in the efb because I’ve been looking at it for multiple times but I really can’t see it 😓🤔
- In reply toHoLeeKao⬆:KKUN你太美 @KUNKUN
We did not discuss the same thing. What I mean is that on the BA787-9RR configuration, there was an issue with the timing of ATidle (the post has already explained it clearly. According to FCOM, ATidle should start when the radio altitude is 30 feet. The picture I provided shows that it was actually below 30 feet, but the FMA still did not display the word "IDLE".
- JIn reply toKUNKUN⬆:Jonathan Martínez @jmartin3z
What am I doing wrong?
@LeadDeveloper @TechnicalAssistant- Francis @LeadDeveloper2026-03-13 15:30:51.027Z
Hi,
Is this a flightsim.to livery or one of our work?- JJonathan Martínez @jmartin3z
all default liveries. I had to disable it and re-enable it and worked.
- JJonathan Martínez @jmartin3z
There's a couple of liveries that doesn't let me move the thrust nor flaps. (Bravo's)
- In reply tojmartin3z⬆:Francis @LeadDeveloper2026-03-13 15:33:59.633Z2026-03-13 16:03:15.472Z
Try streaming your plane vs downloading. And tell me your results.
But I will show Microsoft your pink texture issue assuming you downloaded the plane.
- KKUN你太美 @KUNKUN
Sir, I would like to ask when the update regarding the 787-9 payload fix will be released. It should be in Update 4.9, right?
In reply toKUNKUN⬆:Francis @LeadDeveloper2026-03-13 16:02:23.786ZHi
there was changes to the MFD weight and balance.
Other topics you mentioned were not looked at nor revised and were not planned for release.This was adjusted in combination with our simmbrief profile.
- KKUN你太美 @KUNKUN
So in other words, it means that the payload repair is still not yet checked, correct?
- Francis @LeadDeveloper2026-03-13 16:22:47.047Z
Please look at the screenshots i recently posted.
Use Simbrief to obtain your WB.Your other issues will be met but no exact date as to when.